Vetus Toilet type HATO, 230 Volt 50 Hz with push button control *, Part No. HATO220

The wall mounted marine toilet provides a solution where space is limited and enables toilet installation where a floor standing model would be impractical.

Benefits of the VETUS electric marine toilet HATO220:

• Wall mounting is ideal when floor space is limited
• Height can be set from 415 up to 600 mm.
• Comfortable seat.
• Easy to clean porcelain bowl.
• Very quiet macerator/discharge pump – 60 dB (A).
• Stainless steel macerator blade.
• Large capacity discharge pump.
• Very low water consumption.
• Operated with a push button.
• Easy to install and simple maintenance.
• Separate pump and 98 mm diameter macerator.
• 500 Watt motor – capacity of 42 l/min at 3 metres head.
• Single flush system which flushes approximately 5.5 litres of water.
• We recommend that the flush water be drawn from the main pressurized fresh water system. Alternatively, a separate pump and fine filter can be installed to draw seawater from outside the boat.
• Maximum holding tank 3 metres above the toilet discharge connection. The maximum length of ø 19 mm discharge hose can be up to 30 metres.
• The internal diameter of the outlet pipe is only 19 mm. This means that the toilet can be located in any convenient position aboard and can be connected simply to the waste water tank, using VETUS sanitation hose type SAHOSE.
• The discharge pumps are easily accessible for occasional cleaning if required.
• All toilets are provided with a water lock and non-return valve in the discharge line.

Technical documentation

Installation Instructions

Manufacturer Link